Filter
Top Products
9-22
NOT AVAILABLE – In manual sending, you
entered a speed dialling
number under which a
group is registered.
Use regular dialling, or
enter a one-touch speed
dialling button or coded
speed dialling code that
only has one fax/
telephone number
registered.
PUT IN CARTRIDGE – There is no BJ cartridge
installed in the fax.
Install the BJ cartridge.
(see p. 1-9)
REC’D IN MEMORY – The fax received the
document in memory
because paper or ink ran
out, a paper jam
occurred, or the
incorrect BJ cartridge
was installed.
Load paper in the multi-
purpose tray
(see p. 1-12), replace
the BJ cartridge
(see p. 9-8) or clear the
paper jam (see p. 9-3).
SET DOCUMENT – The document is not set
correctly or at all.
Set or re-set the
document.
TX/RX CANCELLED – You pressed [Stop] to
cancel the transmission.
If required, try sending
again.
TX/RX NO.
nnnn
– When the fax sends or
receives a document, it
assigns it a unique
identification number
(
nnnn
).
Write the number down
if you will need it later.
TX/RX NO.
nnnn
SCANNING P.
nnn
MEMORY FULL
(Three messages
toggle.)
– The fax is sending a
document and its
memory is full.
The fax continues to
send the document as
memory becomes
available.
WAIT COOLING – During printing, the BJ
cartridge print head may
have become too hot.
Allow the fax to cool
down. The fax will
resume printing when it
has cooled down.
Message Error Code Cause Action