Filter
Top Products
7-4
KK
What happens when Fax/Tel mode is selected
KK
Setting the options for Fax/Tel mode
If you set Fax/Tel mode, you can control precisely how the fax handles incoming calls by adjusting the
following settings:
• Adjust the time the fax takes to check whether a call is from a fax machine or a telephone (RING START
TIME setting).
• Adjust the length of time the fax rings when the call is a voice call (F/T RING TIME setting).
• Set whether the fax switches to receive mode after the ring time set in F/T RING TIME has elapsed
(DEFAULT ACTION setting).
The default settings and selectable settings vary depending on the current country selection.
Type of call
Telephone charges
begin for the caller.
Sending document
manually
Sending document
automatically
The fax answers without ringing.
The document is
received automatically.
Pick up the handset to
talk.
DISCONNECT
(The fax tone is detected
and the fax switches to
receive mode.)
The fax disconnects the
call.
RECEIVE
DEFAULT ACTION
Choose between:
RECEIVE and DISCONNET.
Telephone Fax Fax
The fax starts ringing.
If you don’t pick up the handset
The fax tone is not detected.
The fax tone is
detected.
The fax listens for the fax tone.
RING START TIME
F/T RING TIME
Not all fax machines are capable of sending a fax tone. For those cases if you set the DEFAULT
ACTION to RECEIVE, the fax switches to receive mode automatically and starts receiving the
document. If no document comes in, it disconnects the call after approximately 40 seconds.