Canon B160 Fax Machine User Manual


 
8-3
Selecting a menu
8
SETTINGS AND ACTIVITY REPORTS
USER SETTINGS
For details on accessing the settings below, see p. 8-2.
The default settings and selectable settings vary depending on the current country selection. The values
shown here are average values.
Name
Description Settings
DATE & TIME Set the date and time (24-hour clock) using the numeric buttons.
-
UNIT TELEPHONE # Enter your fax number using the numeric buttons.
-
UNIT NAME This is the name that appears at the top of each fax page you send.
(see p. 2-8)
-
TX TERMINAL ID This option sets the parameters for the identification header that
appears on every page you send.
ON/OFF
TTI POSITION Select the position of the TTI.
INSIDE IMAGE: Position the TTI inside the image area.
OUTSIDE IMAGE: Position the TTI outside the image area.
INSIDE IMAGE/
OUTSIDE IMAGE
TELEPHONE # MARK Select the prefix for the telephone/fax number.
TEL/FAX
SCAN CONTRAST Set the density of the reproduction. Set DARKER for light originals and
LIGHTER for dark originals.
STANDARD/DARKER/
LIGHTER
OFFHOOK ALARM Enable/disable the off hook alarm. The alarm alerts you that the
optional handset is not seated properly in its cradle.
ON/OFF
VOLUME CONTROL Set the volume of the fax sounds.
-
CALLING VOLUME Set the volume of the ring produced when the fax detects a voice call
when Fax/Tel mode is set.
1/2/3
KEYPAD VOLUME Set the volume of the keypad.
0 (off)/1/2/3
ALARM VOLUME Set the volume of the error alarm sound.
0 (off)/1/2/3
LINE MONITOR VOL Set the volume of the line monitor (sound during dialling).
0 (off)/1/2/3
RX CALL LEVEL Set the ring tone.
STANDARD/HIGH
TEL LINE TYPE Set the dialling method the fax uses to match the type of phone line
you have.
TOUCH TONE/
ROTARY PULSE
R-KEY SETTING Set the type of line to which your fax is connected.
PSTN/PBX
PSTN Your fax is connected directly to an outside line.
-
PBX:
ACCESS TYPE
ACCESS NUMBER
Your fax is connected through a PBX.
You can set the PBX type to PREFIX, HOOKING or EARTH
CONNECTION.
If you select PREFIX, you can enter an outside line access number of
up to 19 digits.
EARTH CONNECTION/
PREFIX/HOOKING
-