Filter
Top Products
13
3
Number of copies of the selected image
Total number of images currently set to be printed
Choose the number of copies.
Press the ., buttons to choose the number of
copies to be printed.
You can specify 99 copies per image.
To choose other images to print at the same
time, repeat Steps 2 and 3.
4
Print.
Press the p
button to start printing.
The print output receptacle cover will open
automatically when an image is printed.
During printing, the paper will pass in and out of
SELPHY several times. Do not touch the paper
until it has been ejected into the print output
receptacle.
Do not allow 50 or more sheets to accumulate in
the print output receptacle.
To cancel printing, press the b(BACK) button
followed by the o button.
5
If the paper runs out, remove the
cartridge.
Slide the cover lever up to open the cartridge
cover.
Slide the cartridge lever down.
The cartridge will be ejected.
6
Insert a new cartridge (p. 7).
Do not eject the cartridge, open the cartridge cover, or close the print output receptacle cover right
after turning on the power or while printing. It may result in equipment damage.
When the total number of copies for printing is set to 0 and you press the
p
button, the currently
displayed image will print once.
If SELPHY is idle for 5 minutes, the power turns off in order to save energy (pp. 70, 71).
If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera
Specied Settings (DPOF Print)” (p. 67).
C OPY