Filter
Top Products
7
Do not stick any part of your hand into the printer interior.
Be sure to place SELPHY safely so as to avoid tripping over the power cord.
This could lead to injury or damage the printer.
Do not use the power cord beyond its rated capacity or voltage, or leave the plug partially
inserted into the power outlet. Do not use if the power cord or plug has been damaged.
Do not allow metallic pins to touch or allow dust to collect on the power plug.
Do not use the power cord for any other equipment except this printer.
This could result in electrical shock or re.
Avoid using, placing or storing the printer in the following places.
-Places subject to strong sunlight.
-Places subject to temperatures above 40° C (104° F).
-Humid or dusty areas.
-Places subject to strong vibrations.
Electrical shock or heating could result in burn, injury or re. Heat may cause deformation of the
printer’s casing.
CAUTION
Unplug the printer when not in use.
Not doing so could result in electrical shock or fire.
CAUTION
Getting Started
This section will prepare you to start printing images. The postcard size cartridge (sold separately)
(p. 3) will be used as an example in this section. However, you can print with other cartridges using the
same steps.
1
Prepare the cartridge.
If there is an orange stopper attached to the
cartridge, remove it as shown in the illustration.
Ink sheet
Check that the ink sheet is taut with no slack.
If the ink sheet is slack, insert the cleaner unit
(p. 3) as shown in the illustration and turn it
slowly to take up the slack. If you overwind the
ink sheet, it may not be possible to use all the
paper for printing and the ink sheet may tear.
Clip
protective paper
Check that the protective paper is correctly
loaded in the cartridge. If the protective sheet
has come out from under the clips, use your
nger to push it back under the clips.
Inserting the Cartridge into SELPHY
C OPY