Filter
Top Products
43
4
Choose where to place the stamps.
Press the udl r buttons to move the stamp.
Depending on the stamp, press the m(DISPLAY)
button, or turn the w wheel to rotate the stamp
90 degrees.
Press the o button to place the stamp.
5
Choose whether or not to add another stamp.
To add a stamp, press the l r buttons, or turn
the w wheel to choose [Yes], then press the
o button. Repeat Steps 3 to 5.
To print without adding more stamps, press the
l r buttons or turn the w wheel to choose
[No] and press the o button. Then proceed to
Step 6.
6
Print.
Press the ., buttons to choose the number of
copies to be printed.
Press the p button to start printing.
With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34),
and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.
Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not
affect the stamps.
Images with a pixel resolution below 640×480 or an aspect ratio greater than 2:1 cannot be
printed with stamps.
When a cartridge is replaced mid-way through printing, automatic adjustments (the printed area
of the image, the placement of the stamps, etc.) will be made depending on the paper size of the
new cartridge. However, if settings incompatible with the new cartridge have been selected, the
printer will restore the [Creative Print] screen.
In Step 4, pressing the b(BACK) button and then the o button will clear all clip art.
You can add clip art to SELPHY using the supplied software (pp. 56, 62-64).
C OPY