Filter
Top Products
36
Set Positive Mode
†
• Function:
Sets the video output to normal (positive). (Also, the Auto-White Balance will be adjusted once.)
• Timing of the “C-response Packet” sent to the PC:
Right after this setting is done.
• The parameter of the “C-response Packet”:
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number Command Parameter MSH Parameter LSH
$10 $ 8 * $ 3 8 $ 0 0 $ 0 0
Set Negative Mode
†
• Function:
Sets the video output to negative. (Also, the Auto-White Balance will be adjusted once.)
• Timing of the “C-response Packet” sent to the PC:
Right after this setting is done.
• The parameter of the “C-response Packet”:
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number Command Parameter MSH Parameter LSH
$10 $ 8 * $ 38 $ 0 1 $ 0 0
3.6 Positive/Negative Commands
†
The RE-350 responds in 500 msec with a C-response data packet after the reception of this command, but it will
be still working on the AWB adjustment. (The real AWB operation time will be longer than 500 msec.)