Canon RE-350 Webcam User Manual


 
61
re350.c RE-350 communications driver.
re350.h Driver definitions.
re350.obj Object file.
re350dll.dll Dynamic Link Library.
re350dll.mak Microsoft C/C++ Version 1.52 Project (NMAKE)
example.c Sample Windows application.
example.obj Object file
example.exe Executable Windows Application
example.def Module definition file.
example.mak Microsoft C/C++ Version 1.52 Project (NMAKE)
readme.doc This file.
RE-350 SDK File Definitions
RE-350 Demo Application (\APP)
How to Use the Demo Application:
The
RE-350 Demo Application is a 16bit application that runs under Windows 95 and Windows 3.1.
1. Connect the RE-350 to the computer. Using a correctly pinned RS-232 cable (pp.5759) connect one end to the RS-
232C
output on the RE-350 and connect the other end to an available COM port on your computer.
2. Turn on the RE-350 and the computer and launch Windows.
3. In the APP directory that was created from the SDK disk is a file named CTL3DV2.DLL. This file should be placed
into your System folder within Windows [c:\Windows\System].
4. Double click on the
RE-350 Demo Application icon in the APP directory.
When the application has successfully launched, the On-Line
LED should be lit on the RE-350's front control panel
and within the
GUI of the software interface.
Very simply the RE-350 Demo Application offers remote operation of all manual buttons and control knobs located on
the front control panel via the RE-350 graphical user interface.
If the Application Does Not Launch Properly Check:
COM Port Setting The COM port setting selection in the RE-350 Demo Application should match the COM port
the RE-350 is connected to on the computer.
ID Setting The ID Setting on the rear panel of the RE-350 (p.3) should match the ID Setting the RE-350 is
set to.
Baud Rate The Baud Rate setting selection in the RE-350 Demo Application should match the baud rate
selected via the switch on the rear panel of the RE-350 (p.3).
Cable Make sure you are using a correctly pinned cable. Check with the pin out diagram on pp.5759.