Filter
Top Products
9
1.3 Operational Procedures Overview
1.3.1 Procedure for using the Front Panel
1
2
3
4
With the shutter speed
switch, set the proper
shutter of the
RE-350.
Turn on the main power.
Operate designated
switches.
Turn off the main power.
1. The power LED on the RE-350 will be turned on
2. Automatically the
RE-350 will be initialized.
3. The White Balance will be adjusted automatically and the White balance
LED will blink while finding a proper white balanced setting. If the RE-
350 can not find a proper setting, the White Balance LED will be off, if
setting is found, the LED will be on.
4. The RE-350 will start to find the point of focus, the Auto Focus LED will
be blinking. Once the appropriate point of focus is found, the Auto Focus
LED will be on, if not, the LED will be off.
The RE-350 will operate according to the condition of the switches.
The RE-350 will be turned off and every LED will be off.
Order
RE-350's Condition and LED Status
Operations