Filter
Top Products
14-3
2. Formatting an SD Card
• Use the procedure under “Reset” (page 12-3) to format an SD card.
3. SD Card Precautions during Use
• SD card problems can normally be corrected by reformatting the card. However, it is always a
good idea to take along more than one SD card to avoid data storage problems.
• Card formatting (initialization) is recommended before using a new SD card for the first time.
• If an SD card has been formatted on a computer or other device, you can use it as-is without
reformatting. A computer or other device also will be able to use an SD card that has been
formatted with the calculator.
• Never perform any of the following operations while the SD card is being accessed.
- Removing the SD card
- Connecting or disconnecting a USB cable
- Turning off the calculator
- When connected to a computer, exiting the FA-124 software or shutting down the computer
• Note that an SD card needs to be oriented correctly (proper side must be facing upwards,
the proper end must be inserted) when inserting it into the calculator. Trying to force an SD
card into the slot when it is oriented incorrectly can damage the card and slot.
• Use of certain SD cards while calculator battery power is low can cause the display to go
blank without displaying the low battery warning message. If this happens, replace the
batteries.
I Recommended SD Card Types
Toshiba
SD-NA032MT SD-NA064MT SD-NA128MT SD-NA256MT
SD-NA512MT SD-FA128MT SD-FA256MT
SD-C01GTR SD-C02GTR SD-C02GT4
SanDisk
SDSDB-64-J60 SDSDB-128-J60 SDSDB-256-J60
SDSDB-512-J60 SDSDH-256-903 SDSDH-512-903
SDSDB-1024 SDSDB-2048 SDSDH-1024 SDSDH-002G
For detailed information (specifications, features, etc.) about the SD card, contact the SD card
manufacturer.