Filter
Top Products
A-2
Message Meaning Countermeasure
Argument
ERROR
• Incorrect argument specification
for a command that requires an
argument.
• Correct the argument.
Dimension
ERROR
• Illegal dimension used during matrix
or list calculations.
• Check the matrix or list dimension.
Range ERROR
Input of an improper V-Window
value.
V-Window range settings exceeded
when a graph is redrawn.
Input of an improper value on the
range screen and use of that value
for execution.
The spreadsheet cell range was
exceeded by paste, recall, or other
cell operation.
Change the V-Window value so it
is within range.
Redraw using the proper settings.
Input a proper range value.
Repeat the procedure taking
care that the cell range is not
exceeded.
Condition
ERROR
• Execution of a calculation or
function before all conditions
required for execution are met.
• Check the conditions and make
any necessary corrections.
Non-Real
ERROR
• Calculation that produces a complex
number when Real is specified for
the Complex Mode setting on the
Setup screen, even though the
argument is a real number.
• Change the Complex Mode
setting to something other than
Real.
Complex
Number In List
• List containing complex number
used in a calculation or operation
for which complex number data is
invalid.
• Change all data in the list to real
numbers.
Complex
Number in
Matrix
• Matrix containing complex number
used in a calculation or operation
for which complex number data is
invalid.
• Change all data in the matrix to
real numbers.
Complex
Number in
Data
• Data sent from a function of this
calculator (matrix, etc.) includes
complex number data, but the
corresponding function of the
receiving calculator does not
support data that includes complex
numbers.
Example: Attempting to send a
matrix containing a complex number
in an element to CFX-9850G.
• Send data that does not include
complex numbers.
Can’t Simplify • Fraction simplification was
attempted using the Simp function
(page 2-21), but simplification
could not be performed using the
specified divisor.
Example: Specifying a divisor of 3 to
simplify the fraction 4/8.
• Specify a different divisor or
execute Simp without specifying
any divisor.