Casio ISA550WBUN3K9 Network Router User Manual


 
User Management
Configuring User Authentication Settings
Cisco ISA500 Series Integrated Security Appliances Administration Guide 393
9
STEP 5 Click OK to save your settings.
Configuring User Authentication Settings
User authentication is a means of identifying the user and verifying that the user is
allowed to access some restricted services. For example, a user can be identified
as a SSL VPN user in order to access your network resources over SSL VPN
tunnels.
The security appliance authenticates all users when they attempt to access your
network resources in different zones. Users on the VLANs perform only local
tasks, and are not required to be authenticated by the security appliance.
The security appliance supports a local database that is stored on the security
appliance and a variety of AAA server types, such as RADIUS, Lightweight
Directory Access Protocol (LDAP), and Active Directory (AD). You can use the local
database, an AAA server, or both to perform user authentication. The local
database supports up to 100 users, so you need to use the AAA server for
authentication if the number of users accessing the network is more than 100
users.
NOTE The user group service policy can only be configured locally. All user groups on an
AAA server need to be duplicated locally.
Refer to the following topics:
Using Local Database for User Authentication, page 394
Using RADIUS Server for User Authentication, page 394
Using Local Database and RADIUS Server for User Authentication,
page 397
Using LDAP for User Authentication, page 398
Using Local Database and LDAP for Authentication, page 400