Filter
Top Products
Configuration Wizards
Using the Remote Access VPN Wizard
Cisco ISA500 Series Integrated Security Appliances Administration Guide 55
2
• Configuring WAN Settings, page 56
• Configuring Operation Mode, page 56
• Configuring Access Control Settings, page 57
• Configuring DNS and WINS Settings, page 57
• Configuring Backup Servers, page 58
• Configuring Split Tunneling, page 58
• Viewing Group Policy Summary, page 58
• Configuring IPsec Remote Access User Groups, page 59
• Viewing IPsec Remote Access Summary, page 59
Starting the Remote Access VPN Wizard
STEP 1 Click Configuration Wizards > Remote Access VPN Wizard.
STEP 2 On the Getting Started page, choose IPsec Remote Access from the VPN Tunnel
Type drop-down list.
STEP 3 Click Next.
Configuring IPsec Remote Access Group Policy
STEP 4 Use the IPsec Group Policy page to configure the following parameters of the
IPsec Remote Access group policy:
• Group Name: Enter the name for the group policy.
• IKE Authentication Method: Specify the authentication method.
- Pre-shared Key: Uses a simple, password-based key to authenticate. If
you choose this option, enter the desired value that remote VPN clients
must provide to establish the VPN connections. The pre-shared key must
be entered exactly the same here and on remote VPN clients.
- Certificate: Uses the digital certificate from a third party Certificate
Authority (CA) to authenticate. If you choose this option, select a CA
certificate as the local certificate from the Local Certificate drop-down
list and select a CA certificate as the remote certificate from the Peer
Certificate drop-down list for authentication. The selected remote
certificate on the IPsec VPN server must be set as the local certificate on
remote VPN clients.