Filter
Top Products
Status
Network Status
Cisco ISA500 Series Integrated Security Appliances Administration Guide 88
3
Network Status
Use the Network Status pages to view information for the various interfaces, the
network usage reports, the WAN bandwidth reports, all ARP (Address Resolution
Protocol) entries, and DHCP address assignment. Refer to the following topics:
• Status Summary, page 88
• Traffic Statistics, page 91
• Usage Reports, page 92
• WAN Bandwidth Reports, page 94
• ARP Table, page 95
• DHCP Bindings, page 95
• STP Status, page 96
• CDP Neighbor, page 98
Status Summary
Use the Status Summary page to view information for the various interfaces.
Status Summary
Field Description
Ethernet
Port Number of the physical port.
Name Name of the physical port.
Enable Shows if the physical port is enabled or disabled.
Port Type Type of the physical port, such as WAN, LAN, or DMZ.
Line Status Shows if the physical port is connected or not.
Speed/Duplex Duplex mode (speed and duplex setting) of the
physical port.
Mode Access mode of the physical port. A WAN or DMZ port
is always set to Access mode and a LAN port can be
set to Access or Trunk mode.