Cisco Systems 15454 SDH Network Router User Manual


 
Figures
xix
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
Figure 5-4 G1K-4 Faceplate and Block Diagram 5-9
Figure 5-5 ML100T-12 Faceplate 5-11
Figure 5-6 ML1000-2 Faceplate 5-13
Figure 5-7 GBICs with Clips (left) and with a Handle (right) 5-16
Figure 5-8 CWDM GBIC with Wavelength Appropriate for Fiber-Connected Device 5-17
Figure 5-9 G-Series with CWDM/DWDM GBICs in Cable Network 5-18
Figure 5-10 Mylar Tab SFP 5-18
Figure 5-11 Actuator/Button SFP 5-19
Figure 5-12 Bail Clasp SFP 5-19
Figure 6-1 FC_MR-4 Faceplate and Block Diagram 6-2
Figure 7-1 ONS 15454 SDH Cards in a 1:1 Protection Configuration 7-2
Figure 7-2 ONS 15454 SDH Cards in a 1:N Protection Configuration 7-3
Figure 7-3 ONS 15454 SDH Cards in an Unprotected Configuration 7-5
Figure 8-1 CTC Software Versions, Node View 8-2
Figure 8-2 CTC Software Versions, Network View 8-2
Figure 8-3 Node View (Default Login View) 8-7
Figure 8-4 Terminal Loopback Indicator 8-9
Figure 8-5 Facility Loopback Indicator 8-9
Figure 8-6 Network in CTC Network View 8-11
Figure 8-7 Card View 8-13
Figure 9-1 ONS 15454 SDH Timing Example 9-8
Figure 10-1 ONS 15454 SDH Circuit Window in Network View 10-4
Figure 10-2 Terminal Loopback in the Edit Circuits Window 10-9
Figure 10-3 Traditional DCC Tunnel 10-11
Figure 10-4 VC4 Monitor Circuit Received at an STM-1 Port 10-12
Figure 10-5 SNCP Go-and-Return Routing 10-14
Figure 10-6 Secondary Sources and Destinations 10-17
Figure 10-7 Alternate Paths for Virtual SNCP Segments 10-18
Figure 10-8 Mixing 1+1 or MS-SPRing Protected Links with an SNCP 10-19
Figure 10-9 Ethernet Shared Packet Ring Routing 10-19
Figure 10-10 Ethernet and SNCP 10-20
Figure 10-11 VCAT Common Fiber Routing 10-23
Figure 11-1 Four-Node, Two-Fiber MS-SPRing 11-3
Figure 11-2 Four-Node, Two-Fiber MS-SPRing Traffic Pattern 11-4
Figure 11-3 Four-Node, Two-Fiber MS-SPRing Traffic Pattern After Line Break 11-5