Filter
Top Products
8-9
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
Chapter 8 Cisco Transport Controller Operation
8.5.1 Node View
Figure 8-4 Terminal Loopback Indicator
Figure 8-5 Facility Loopback Indicator
The wording on a lower-shelf card in node view shows the status of a card (Active, Standby, Loading,
or Not Provisioned). Table 8-7 lists the card statuses.
Green Unlocked-enabled The port is fully operational and performing as
provisioned. The port transmits a signal and displays
alarms; loopbacks are not allowed.
Violet Unlocked-disabled,
automaticInService
The port is out-of-service, but traffic is carried. Alarm
reporting is suppressed. The node monitors the ports for
an error-free signal. After an error-free signal is detected,
the port stays in this state for the duration of the soak
period. After the soak period ends, the port service state
changes to Unlocked-enabled.
Raised fault conditions, whether or not their alarms are
reported, can be retrieved on the CTC Conditions tab or
by using the TL1 RTRV-COND command. The AINS
port will automatically transition to Unlocked-enabled
when a signal is received for the length of time
provisioned in the soak field.
Table 8-6 Node View Card Port Colors and Service States (continued)
Port Color Service State Description
Table 8-7 Node View Card States
Lower Shelf Card Status Description
Sty Card is in standby.
Act Card is active.
NP Card is not present.
Ldg Card is resetting.