A-16
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
Appendix A Hardware Specifications
A.5.5 STM1E-12 Card Specifications
–
Weight not including clam shell: 0.8 kg (1.9 lb)
A.5.5 STM1E-12 Card Specifications
The STM1E-12 card has the following specifications:
• STM1E-12 input
–
Bit rate: 155.52 Mbps +/–5 ppm for STM-1
or 139.264 Mbps +/–15 ppm for E-4
–
Line code: Coded mark inversion (CMI)
–
E-4 (can be framed or unframed)
–
Termination: Unbalanced coaxial cable
–
Input impedance: 75 ohms +/–5%
–
Cable loss: Up to 12.7 dB at 78 MHz (for cable length, see the specification of the cable that
you are using)
–
AIS: ITU-T G.704 compliant
• STM1E-12 output
–
Bit rate: 155.52 Mbps +/–5 ppm for STM-1
or 139.264 Mbps +/–15 ppm for E-4
–
Line code: CMI
–
E-4 can be framed or unframed
–
Termination: Unbalanced coaxial cable
–
Output impedance: 75 ohms +/–5%
–
AIS: ITU-T G.704 compliant
–
Pulse shape: ITU-T G.703, Figure 18 and 19 for E-4, Figure 22 and 23 for STM-1
–
Pulse amplitude: 1 V +/– 0.1 V peak-to-peak
–
Loopback modes: terminal and facility
• STM1E-12 electrical interface
–
Connectors: 1.0/2.3 miniature coax connectors in the FMEC STM1E 1:1 card
• Environmental
–
Overvoltage protection: As in ITU-T G.703 Annex B
–
Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
–
Operating humidity: 5 to 95%, noncondensing
–
Power consumption: 59.40 W, 1.24 A at –48 V, 202.8 BTU/hr
• Dimensions
–
Height: 321.3 mm (12.650 in.)
–
Width: 18.2 mm (0.716 in.)
–
Depth: 228.6 mm (9.000 in.)
–
Depth with backplane connector: 235 mm (9.250 in.)
–
Weight not including clam shell: 0.7 kg (1.7 lb)