Filter
Top Products
55
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
OL-5792-04
Replacing the Power Supply
Figure 54 Connecting an ILP Cable in Cisco 2821 and Cisco 2851 Routers
.
Step 6
Install the bezel onto the front of the chassis as follows:
a.
Engage the plastic tabs of the bezel into the slots in the chassis.
b.
Slide the bezel until it is centered and tight against the chassis.
Step 7
If you are finished installing modules, install the cover on the router. See the “Installing the Chassis
Cover” section on page 56.
1 ILP cable connector, motherboard 3 ILP cable guides
2 ILP cable connector, power supply
1
3
3
3
3
3
127115
2