Filter
Top Products
58
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
OL-5792-04
Installing the Chassis Cover
Installing the Cover on Cisco 2821 and Cisco 2851 Routers
To install the chassis cover on a Cisco 2821 or a Cisco 2851 router, follow these steps. A number 2
Phillips screw driver is required.
Step 1
Place the chassis on a flat surface.
Step 2
Hold the cover at a 45-degree angle, and insert the tabs into the slots along the front (bezel) edge of the
chassis. See
Figure 56.
Step 3
Center the cover over the chassis and lower it onto the chassis.
Step 4
Install the three cover screws.
Figure 56 Installing Cover on Cisco 2821 and Cisco 2851 Routers
1 Insert tabs and center the cover 2 Close the cover
103964
1
2