Filter
Top Products
4
Installing and Upgrading Fans in Cisco 2811 Series Routers
78-17850-01
Removing the Chassis Cover
The cover should now be positioned back from the bezel about 1/4 inch (6 to 7 mm). If it is not, repeat
Step
a. and Step b. for one or both sides of the chassis.
Step 5
Slide the cover toward the back of the chassis until it contacts a stop (about 1 inch [25 mm]). The front
edge of the cover should be free. See
Figure 3.
Note
After the cover is loosened as in Step 4, there may still be some friction to overcome as you
complete the removal. However, do not use the screwdriver again as in Step 4.
Step 6
Lift the cover free of the router chassis.
Figure 3 Cisco 2811 Router—Cover in Position for Removal
103477
Plastic bezel
Approx. 1 inch
(25 mm)