Filter
Top Products
9-17
Catalyst 2940 Switch Software Configuration Guide
78-15507-02
Chapter 9 Configuring the Switch Interfaces
Monitoring and Maintaining the Interfaces
This example shows how to re-enable Fast Ethernet interface 0/5:
Switch# configure terminal
Switch(config)# interface fastethernet0/5
Switch(config-if)# no shutdown
Switch(config-if)#
*Sep 30 08:36:00: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to up
To verify that an interface is disabled, enter the show interfaces privileged EXEC command. A disabled
interface is shown as administratively down in the show interfaces command output