Filter
Top Products
4-3
Cisco Active Network Abstraction 3.6.6 MPLS User Guide
OL-19192-01
Chapter 4 Viewing MPLS VPN Properties
Viewing Virtual Router Properties
Figure 4-1 VRF Properties
Step 2
In the VRF Properties window, view the following VRF properties:
Note The VRF Properties window only displays properties and attributes that are provisioned in the
VRF. You might not see all the fields and tabs described here.
• Route Distinguisher—The route distinguisher configured in the VRF. (The Route Distinguisher field
is not shown in Figure 4-1.)
• IPv4 Address Family—Route targets are automatically assigned to IPv4 address family.
• IPv6 Address Family—If you are running an IPv6 VPN over MPLS implementation, you can assign
route targets to IPv6 address families, in which case, the IPv6 Address Family tab will appear. For
information about 6VPE and IPv6 address family procedures, refer to Chapter 6, “IPv6 VPN over
MPLS.”
• Export Route Targets—Displays the export route targets contained by the VRF.
• Import Route Targets—Displays the import route targets contained by the VRF.
1 IPv4 Address Family tab 2 IPv6 Address Family tab
3 Export route targets 4 Import route targets
5 Sites tab 6 VRF table
5
6
1 2 3 4