Filter
Top Products
5-11
Cisco Active Network Abstraction 3.6.6 MPLS User Guide
OL-19192-01
Chapter 5 Viewing MPLS Logical Inventory
Viewing Port Configuration
• Sending Alarms—This option is currently unavailable.
• Outgoing Int Name—The name of the outgoing interface; displayed if the Routing Protocol type is
local.
Step 5 Press Ctrl + F4 to close the VRF Properties window.
Viewing Port Configuration
In addition to viewing logical inventory information from the logical inventory tree branch, you can also
view services provisioned on physical ports by clicking a physical port in the physical inventory tree
branch. Information that is displayed includes:
• Physical layer information.
• Layer 2 information, for example, ATM and Ethernet.
• The subinterfaces used by a VRF.
For detailed information on viewing physical inventory information, see the Cisco Active Network
Abstraction 3.6.6 User Guide.
Figure 5-2 shows an example of port information (including the subinterfaces) displayed when a port is
selected in the physical inventory branch of the inventory window.
Figure 5-2 Port Information in the Inventory Window
The subinterface is the logical interface defined in the device; all its parameters can be part of its
configuration. The following information is displayed in the subinterface table for the selected port:
• Address—The IP address defined in the subinterface.