Filter
Top Products
6-13
Cisco Active Network Abstraction 3.6.6 MPLS User Guide
OL-19192-01
Chapter 6 IPv6 VPN over MPLS
Provisioning Route Targets
Step 5 If you want to preview the route target, click Preview.
The Result tab displays the commands that will be executed on the device.
Step 6 Click Execute.
The Result tab displays the commands that were executed on the device.
Step 7 Click Close to close the window.
Deleting Route Targets with IPv4 and IPv6 Address Families
To remove a route target with an IPv4 or IPv6 address family from a device:
Step 1 In the Cisco ANA NetworkVision navigation tree, right-click a router containing the VRF with the route
target you want to remove and choose Inventory.
Step 2 In the device inventory view, expand the Logical Inventory tree until you find the VRF containing the
route target you want to remove.
Step 3 Click the VRF.
The VRF properties appear in the Cisco ANA workspace.
Step 4 Right-click an import or an export route target and choose Configuration > Remove route target
(Figure 6-9).
Step 5 On the confirmation message box, click OK.