Filter
Top Products
5-5
Cisco Active Network Abstraction 3.6.6 MPLS User Guide
OL-19192-01
Chapter 5 Viewing MPLS Logical Inventory
Viewing MPLS VPN Properties
• Routing Protocol—The routing protocol used to communicate with other routers.
• Sending Alarms—This option is currently unavailable.
• Outgoing Interface Name—The name of the outgoing interface; displayed if the Routing Protocol
type is local.
Viewing the ARP Table
The ARP Entity branch displays the following Address Resolution Protocol (ARP) information:
• MAC—The interface MAC address.
• Interface—The interface name.
• IP Address—The interface IP address.
• Type—Indicates the interface type:
–
Dynamic—An entry that was learned by the device according to network traffic.
–
Static—An entry that was learned by a local interface or by configuring a static route.
–
Other—An entry that was learned by another method not explicitly defined.
–
Invalid—In SNMP, this type is used to remove an ARP entry from the table.
Viewing Rate Limit Information
Select Routing Entities > Routing Entity > IP Interfaces tab and double-click a specific row to
display the IP interface properties. If a rate limit is configured on the IP interface, the Rate Limits tab is
displayed.
Note Rate limit information is relevant only for Cisco IOS devices.
The following information is displayed in the Rate Limits tab of the IP Interface Properties dialog box:
• Type—The rate limit direction, either Input or Output.
• Max Burst—Excess burst size in bytes.
• Normal Burst—Normal burst size in bytes.
• Bit Per Second—Average rate in bits per second.
• Conform Action—The action that can be performed on the packet if it conforms to the specified rate
limit (rule), for example, continue, drop, change a bit, or transmit.
• Exceed Action—The action that can be performed on the packet if it exceeds the specified rate limit
(rule), for example, continue, drop, change a bit, or transmit.
• Access List—A hyperlink that highlights the related access list in the Access List table.
• Sending Alarms—This option is currently unavailable.