6-108
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M NDE Configuration Dialog Box
• PFC Modify button—Modifies the source address used in the NDE packets containing statistics
from the PFC.
• MSFC Modify button—Modifies the source interface for NDE packets containing statistics on
routed flows exported from the MSFC cache.
• Dest. Modify button—Modifies the NDE destination host IP address and UDP port.
• Enable NDE button—Enables the export of traffic statistics on Layer 3-switched and routed flows
that have expired or been purged from the MSFC and PFC caches.
Note To enable NDE, several parameters must be configured: the source interface for NDE packets containing
statistics on routed flows exported from the MSFC cache; the desination address and port of the Netflow
Collector; and an IP route cache on the MSFC source interface.
• Disable NDE button—Disables NDE flow export on Layer 3-switched and routed flows.
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the object.
This field has the following values:
• decommissioned—CEMF is not actively monitoring the object attributes.
• normal—Presence polling of the object.
• normallostcomms—CEMF has lost communication with the device from the normal state.
NDE Filters Tab
Figure 6-84 shows the NDE Filters tab of the C6576M NDE Configuration dialog box.
Figure 6-84 NDE Filters Tab of C6576M NDE Configuration Dialog Box