![](http://pdfasset.owneriq.net/d/ae/dae4948d-ca77-4eb5-a85b-e6fa4618a4db/dae4948d-ca77-4eb5-a85b-e6fa4618a4db-bg30.png)
6-48
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M VLAN Dialog Box
• Enable VLAN-Based QoS button—Enables VLAN-based QoS on each of the VLAN’s member
interfaces.
• Disable VLAN-Based QoS button—Disables VLAN-based QoS on each of the VLAN’s member
interfaces.
EoMPLS Tab
Figure 6-40 shows the EoMPLS tab of the C6576M VLAN dialog box.
Figure 6-40 EoMPLS Tab of the C6576M VLAN Dialog Box
EoMPLS Area
This area contains the followng information:
• Destination IP—Describes where packets are to be sent. A value of “0 0 0 0” will clear any
previously configured value.
• VC ID—Label applied to packets entering the tunnel. A value of “0” will clear any previously
configured value.