Cisco Systems 6500/7600 Network Router User Manual


 
6-113
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M ACL Configuration Dialog Box
C6576M ACL Configuration Dialog Box
The C6576M ACL dialog box describes a numbered or named access control list (ACL) on a Catalyst
6000/6500 series switch or Cisco 7600 series Internet Router. The C65/76M Controller supports
standard and extended, named or numbered ACLs.
Details Tab
Figure 6-88 shows the Details tab of the C6576M ACL dialog box.
Figure 6-88 Details Tab of C6576M ACL Dialog Box
The Details tab of the C6576M ACL dialog box displays the following:
ACL—Numeric or string identifier of an ACL. This attribute, along with Type attribute below,
makes up the unique identifier of the ACL on the managed device.
Type—Indicates the type of ACL: standard or extended.
Remove Current ACL button—Deletes the currently selected ACL object and remove the referenced
ACL from the managed device. The filters defined in the ACL will automatically be disabled against
the incoming/outgoing routing updates of any routing process that references the ACL in its route
distribution list.
Add New ACL button—Displays the subdialog box, shown in Figure 6-89, which allows you to
create a named or numbered, standard or extended Access Control List on the managed device and
deploy an instance of the ACL object in the element manager.
The ACL instance will be deployed with the object name “ACL-<id>”. The following fields are
displayed in the ACL Add subdialog box:
ACL—Numeric or string identifier of an ACL.
Type—Indicates the type of ACL: standard or extended.