Cisco Systems 6500/7600 Network Router User Manual


 
6-54
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M EtherChannel Dialog Box
Configuration Tab
Figure 6-45 shows the Configuration tab of the C6576M EtherChannel dialog box.
Figure 6-45 Configuration Tab of the C6576M EtherChannel Dialog Box
General Area
The General area provides the following information:
Interface Mode—The current operational mode of the interface. This field has the following values:
switchport—Layer 2.
routed—Layer 3.
Speed—The transmission speed in bits per second of the EtherChannel interface.
Bandwidth—Overwrites default bandwidth in kilobits per second.
Note The Bandwidth attribute is an informational parameter used only to communicate the current bandwidth
to the higher-level protocols (such as IGRP, EIGRP and OSPF); you cannot adjust the actual bandwidth
of an interface with this command.
Delay—Specifies the delay in tens of microseconds for an interface or network segment.
Note The Delay attribute is an informational parameter used only to communicate the current bandwidth to
the higher-level protocols (such as IGRP, EIGRP); you cannot adjust the actual delay of an interface with
this command.