![](http://pdfasset.owneriq.net/d/ae/dae4948d-ca77-4eb5-a85b-e6fa4618a4db/dae4948d-ca77-4eb5-a85b-e6fa4618a4db-bg18.png)
6-24
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M Software Dialog Box
Figure 6-18 Pop-up Menu Option to Edit the Running Configuration File
Startup Configuration Area
The Startup Configuration area of the C6576M Software dialog box provides the following information:
• Current Location—The location of the startup configuration file that will be used on the next restart.
If this location is not set, then undefined is displayed. This attribute is read-only.
• Startup Location—The location of the startup configuration file that was used the last time the
system was booted up. This attribute is read-only.
• Config Mode—Cat OS configuration mode. The mode can be one of these values:
–
binary—In binary config mode, any changes to the running configuration are automatically
written to NVRAM.
–
text—In text file configuration mode, the changes are only written to DRAM.
• Text File Location—The location of the Cat OS text configuration file which can be either NVRAM
or a file in the FLASH file system.
• View Startup Configuration button—Displays the startup configuration in a text box (see
Figure 6-19). This attribute is read-only.