![](http://pdfasset.owneriq.net/d/ae/dae4948d-ca77-4eb5-a85b-e6fa4618a4db/dae4948d-ca77-4eb5-a85b-e6fa4618a4db-bg4b.png)
6-75
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M BGP Dialog Box
Distribution List Tab
Figure 6-60 shows the Distribution List tab of the C6576M BGP dialog box.
Figure 6-60 Distribution List Tab of the C6576M BGP Dialog Box
Distribution List Table Area
This area describes filtering of routing updates sent or received by the routing process.
• ACL ID—Unique identifer of an ACL for filtering routing updates sent or received by a routing
process. The ACL specifies which network routes will be permitted or denied in routing updates.
This field has the following values:
–
<1-199>—Standard access list number.
–
<1300-2699>—Expanded access list number.
–
alphanumeric—Named access list.
• Direction—Indicates whether the filter will be applied against routing updates received by the
routing process or advertised by the routing process.
–
in—Applies to updates received.
–
out—Applies to updates advertised.
• Interface—Identifies a particular interface that the filter is applied to. For an incoming filter,
suppresses routing updates received on a specific interface; if not specified, routing updates are
suppressed on all interfaces. For an outgoing filter, suppresses routes from being advertised on a
particular interface; if not specified, route advertisements are suppressed on all interfaces.
–
Null 0
–
FastEthernet <slot>/<port> (Native IOS only)
–
GigabitEthernet <slot>/<port> (Native IOS only)