![](http://pdfasset.owneriq.net/d/ae/dae4948d-ca77-4eb5-a85b-e6fa4618a4db/dae4948d-ca77-4eb5-a85b-e6fa4618a4db-bg63.png)
6-99
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M EIGRP Dialog Box
–
POS <slot>/<port>
–
ATM <slot>/<subslot>/<port>
–
Port-channel <n> (Native IOS only)
–
VLAN <n>
• Protocol—Source routing protocol from which routes are being distributed into EIGRP. This field
may have the following values:
–
none
–
OSPF
–
EIGRP
–
BGP
–
static
• Source ID—Identifies a specific routing process instance that redistributed routes are derived from.
Edit Distribution List Table Area
This area allows changes to be made to the Distribution Table:
• ACL ID—Unique identifer of an ACL for filtering routing updates sent/received by a routing
process.
• Interface—Identifies a particular interface that the filter is applied to.
• Protocol—Source routing protocol from which routes are being distributed into EIGRP. This field
may have the following values:
–
OSPF
–
EIGRP
–
BGP
–
static
• Direction—Indicates whether the filter will be applied against routing updates received by the
routing process or advertised by the routing process.
• Source ID—Identifies a specific routing process instance that redistributed routes are derived from.
• Add button—Specifies a filter for suppressing or allowing distribution of network routes through
EIGRP routing process.
• Delete button—Removes a filter for suppressing or allowing distribution of network routes through
EIGRP routing process.
Additional Notes Tab
Figure 6-78 shows the Additional Notes tab of the C6576M EIGRP dialog box.