Filter
Top Products
6-69
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M BGP Dialog Box
Figure 6-55 BGP Enable Dialog Box
BGP Network Path Attribute Table Area
The BGP Network Path Attribute Table area contains information about paths to destination networks
received from all BGP peers. This area contains the following columns:
• Peer IP Address—IP address of the peer from which the path information was learned. This address
is 0.0.0.0 if this information was learned internally.
• IP Address—IP address of the destination network.
• Network Mask—Length of the destination network IP adddress prefix in the Network Layer
Reachability Information field.
• Path Origin—Ultimate origin of the path information. This has the following values:
–
igp—Interior Gateway Protocol advertised with a network router configuration command.
–
egp—Exterior Gateway Protocol.
–
incomplete—Unknown origin. Usually, a router that is distributed into BGP from an IGP.
• Border Router IP Address—Address of the border router that should be used for the destination
network.
• Multiple Exit Point Discriminate Metric—Metric used to discriminate between multiple exit
points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute.