![](http://pdfasset.owneriq.net/d/ae/dae4948d-ca77-4eb5-a85b-e6fa4618a4db/dae4948d-ca77-4eb5-a85b-e6fa4618a4db-bg26.png)
6-38
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M VLAN Dialog Box
• mtuTooBigForTrunk—Indicates that while this VLAN’s MTU is supported by this device, it is too
large for one or more of the device’s trunk ports.
• VLAN OS Type —The type of VLAN. This attribute has one of the following values:
–
catOsOnly - the VLAN exists on a hybrid chassis in the CatOS configuration only
–
msfcIosOnly - the VLAN exists on a hybrid chassis in the MSFC IOS configuration only
–
catOsAndMsfcIos - the VLAN exists on a hybrid chassis in both the CatOS and IOS
configurations
–
nativeIos - the VLAN exists on a chassis running native IOS (no CatOS)
• Create VLAN in CatOS Running Config —If the VLAN OS Type is msfcIosOnly, this button will
create the corresponding entries for this VLAN in the CatOS configuration
• Create VLAN in IOS Running Config —If the VLAN OS Type is catOsOnly, this button will
create the corresponding entries for this VLAN in the IOS configuration
• Add VLAN button—Adds a VLAN. Launches the subdialog box shown in Figure 6-31.
Specify the VLAN number to be added and click the Add VLAN button. The string VLAN- will
prepended to the VLAN number specified.
Note The newly added VLAN will not appear automatically in the VLAN object list (bottom left of
Figure 6-30). To refresh the VLAN list, reselect the appropriate Software object.