6-27
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M Software Dialog Box
Tip The configuration Backup/Restore actions are used to upload the switch or router startup configuration
to a server. The configuration can then be edited on the server and downloaded back to the switch or
router.
• Restore Status—Status of the last restore action. This attribute (read-only) has the following values:
–
Ok—The restore operation completed successfully.
–
Failed—The restore operation failed.
–
Not executed—The restore operation was not executed.
• Restore File—The name of the configuration file that will be restored.
• Restore button—Restores the file specified in the Restore File attribute from the TFTP Host to the
startup configuration.
• Scheduled Restore—Schedules the restore operation. It will launch the dialog box shown in
Figure 6-22.
Note The switch or router needs to be reset for the new configuration to take effect.
Figure 6-22 Scheduled Restore Configuration Dialog Box
The Scheduled Restore Configuration dialog box provides the following information:
• Date—The date when the restore will start. The format is MM/DD/YYYY.
• Hour—The hour when the restore will start. It is a 24-hour clock.
• Minute—The minute when the restore will start.
Tip The configuration Backup/Restore actions are used to upload the switch or router startup configuration
to a server. The configuration can then be edited on the server and downloaded back to the switch or
router.