6-116
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M ACL Configuration Dialog Box
• Source Port—The decimal number or name of a source TCP or UDP port. TCP port names can only
be used when filtering TCP. UDP port names can only be used when filtering UDP.
• Destination IP—Number of the network or host to which the packet is being sent.
• Destination Mask—Bitmask used in combination with Destination IP to specify a host address or a
range of addresses to apply filter.
• Destination Operand—Comparison operator for destination TCP or UDP ports.
• Destination Port—The decimal number or name of a destination TCP or UDP port.
• Remark—Comment that describes the access list entry, up to 100 characters long.
• Add Filter button—Appends a permit or deny filter to an ACL.
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the object.
This field has the following values:
• decommissioned—CEMF is not actively monitoring the object attributes.
• normal—Presence polling of the object.
• normallostcomms—CEMF has lost communication with the device from the normal state.
Additional Notes Tab
Figure 6-91 shows the Additional Notes tab of the C6576M ACL dialog box.
Figure 6-91 Additional Notes Tab of the C6576M ACL Configure Dialog Box