6-58
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M EtherChannel Dialog Box
Routing Protocol Tab
Figure 6-47 shows the Routing Protocol tab of the C6576M EtherChannel dialog box.
Figure 6-47 Routing Protocol Tab of the C6576M EtherChannel Dialog Box
EIGRP Area
The EIGRP area of the C6576M EtherChannel dialog box provides the following information:
• EIGRP Interface Table—A list of the EIGRP processes. The following attributes can be configured
for a EIGRP process:
• Bandwidth Utilization (%)—Percentage of the EtherChannel interface bandwidth that the EIGRP
protocol can use.
• Hold Time (sec)—Length of time in seconds that neighbors should consider the sender valid.
• Hello Interval (sec)—Interval in seconds between hello packets.
ISIS Area
The ISIS area of the C6576M EtherChannel dialog box provides the following information:
• ISIS Enabled—Indicates whether or not IS-IS routing is enabled on the interface. This attribute is
read-only.
–
true—IS-IS routing is enabled.
–
false—IS-IS routing is disabled.
• Area Tag—The IS-IS routing area in which the interface participates. If mutli-area IS-IS is
configured on the device, the IS-IS area must be named. Otherwise, this value may be an implicit
null tag. This attribute is read-only.