6-96
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M EIGRP Dialog Box
• Source ID—Identifies the routing process from which routes are being distributed. This field may
have the following values:
–
IS-IS—This is either an implicit null tag or the tag of a named IS-IS routing process.
–
EIGRP—This is a 16-bit autonomous system ID in the range of 1..65535
–
BGP—This is a 16-bit autonomous system ID in the range of 1..65535
–
OSPF—This is a 16-bit OSPF process ID in the range of 1..65535
• IS-IS Routing Level—Indicates IS-IS route level redistribution. This field has the following values:
–
none—For protocols other than IS-IS.
–
level-1—Local area/intra-area dedistribution.
–
level-1-2—Redistribution for both inter- and intra-area routing.
–
level-2—Backbone/interarea redistribution (default).
• Bandwidth—Bandwidth metric. This redistribution metric must be specified for protocols other
than EIGRP if the Default Metric in the Details tab is nil.
• Delay—Delay metric. This redistribution metric must be specified if the Default Metric is nil.
• Reliability—Reliability metric. 0 is least reliable, 255 is 100 percent reiliable. This redistribution
metric must be specified if the default metric is nil.
• Loading—Loading metric. This indicates the effective bandwidth of the network paths where 0 is
least loaded and 255 is 100 percent loaded. This redistribution metric must be specified if the
Default Metric is nil.
• MTU—Maximum transmission unit of the path metric. This redistribution metric must be specified
if the Default Metric is nil.
Metric Default Area
• Default Metric—Default metric used for route redistribution. This metric is used when and explicit
metric is not given during route redistribution process.