Filter
Top Products
6-26
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M Software Dialog Box
Backup/Restore Configuration Area
The Backup/Restore Configuration area of the C6576M Software dialog box provides the following
information:
• TFTP Host—The IP address or hostname of the TFTP server that the startup or running
configurations were backed up to or restored from.
Note The TFTP Host field must be configured in order to back up and restore the configuration. The TFTP
Host must be accessible from the managed device, and there must be sufficient disk space on the host to
store the device’s startup configuration.
• Backup Status—Status of the last backup action. This attribute (read-only) hashas the following
values:
–
Ok—The backup completed successfully.
–
Failed—The backup failed.
–
Not executed—The backup operation was not executed.
• Backup File—The name of the file to which the startup configuration will be copied.
Note If the TFTP server is not the CEMF server, then the file specified by the Backup File field must already
exist. If it does not, the backup action will fail. If the TFTP server is the CEMF server, the file will be
automatically created.
• Backup button—Backs up the current startup configuration to the TFTP server. The backup
filename is specified by the Backup File attribute.
• Scheduled Backup—Schedules the backup operation. It will launch the dialog box shown in
Figure 6-21.
Figure 6-21 Scheduled Backup Configuration Dialog Box
The Scheduled Backup Configuration dialog box provides the following information:
• Date—The date when the restore will start. The format is MM/DD/YYYY.
• Hour—The hour when the restore will start. It is a 24-hour clock.
• Minute—The minute when the restore will start.