![](http://pdfasset.owneriq.net/d/ae/dae4948d-ca77-4eb5-a85b-e6fa4618a4db/dae4948d-ca77-4eb5-a85b-e6fa4618a4db-bg50.png)
6-80
Cisco 6500/7600 Series Manager User Guide
Chapter 6 Logical Object Dialog Boxes
C6576M OSPF Dialog Box
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the object.
This field has the following values:
• decommissioned—CEMF is not actively monitoring the object attributes.
• normal—Presence polling of the object.
• normallostcomms—CEMF has lost communication with the device from the normal state.
Area Tab
Figure 6-64 shows the Area tab of the C6576M OSPF dialog box.
Figure 6-64 Area Tab of the C6576M OSPF Dialog Box
Area Configuration Area
This describes OSPF NSSA and stub area configurations. The information for a particular area can be
displayed by selecting the desired area from the Areas list. When you select an area, the following
information is provided:
• Area ID—Identifies a stub or NSSA area adjacent to the router. The identifier can be specified as
either a decimal value or as an IP address.
• Area Type—Type of area. The type has the following values:
–
default—Not a stub or NSSA area.
–
stub—Information on external routes are not sent to stub areas.