Filter
Top Products
——————————— Actions ———————————————————————————————————
[A] Add ports to capture list
[D] Delete ports from capture list
[X] Exit to Main Menu
Enter Selection: A
This command adds ports to the capture list. Actual monitoring takes
place only if all of the following information has been properly
configured: 1) the capturing status, 2) the identity of a port to which
monitored frames are sent, and 3) a non−empty capture list.
Port numbers should be separated by commas or spaces. A port number range may also be specified. The word ALL indicates all ports. Example: 1, 7−11, AUI, 4, A
Enter port numbers: ALL
This command enables or disables the monitoring (capturing) of frames from ports that have been added to the capture list. Actual monitoring takes place only if all of the following information has been properly configured:
1) the capturing status, 2) the identity of a port to which monitored frames are sent, and 3) a non−empty capture list.
Capturing frames to the Monitor may be [E]nabled or [D]isabled:
Current setting ===> Disabled
New setting ===> Enabled
At this point, we want to send the captured information to a specific port. To do so, select [A]. In this
example, we have selected trunk port B:
Identify Port: 1 to 12[1−12], [AUI], [A], [B], or [N]one:
Select [1 − 12, AUI, A, B, N]: A
Current setting ===> None
New setting ===> B
3.
Now you want to select option [C] and enable “Capturing frames to monitor” to successfully
complete the Port Monitoring configuration.
4.
Configuring VLANs on the Standard Edition IOS
To configure VLANs on the Standard Edition IOS, do the following, starting at the Main Menu:
Select option [V] to open the Virtual LAN Configuration menu:
Catalyst 1900 − Virtual LAN Configuration
—————————————————————— Information ————————————————————————————————————————————
VTP version: 1
Configuration revision: 0
Maximum VLANs supported locally: 1005
Number of existing VLANs: 5
Configuration last modified by: 63.78.39.164 at 00−00−0000 00:00:00
—————————————————————— Settings ———————————————————————————————————————————————
[N] Domain name VTPDomain1
[V] VTP mode control Server
[F] VTP pruning mode Enabled
[O] VTP traps Enabled
—————————————————————— Actions ————————————————————————————————————————————————
[L] List VLANs [A] Add VLAN
[M] Modify VLAN [D] Delete VLAN
[E] VLAN Membership [S] VLAN Membership Servers
[T] Trunk Configuration [W] VTP password
1.
304