Filter
Top Products
Chapter 3 Disassembly and Maintenance
3-6. Adjustments
3-57 CL-S700/CL-S703/CL-S700R
10) Hook a weight of 450g on the “Ribbon-tension spring adjust ribbon (φ80mm)”.
The Front Belt Plate moves and stops at a certain position where it balances with the
weight.
11) Mount the Ribbon Tension Spring Block and set the Ribbon Tension Spring so that no gap
is found between the Front Belt Plate. Then, apply ThreeBond 1401B to the screws “C”
and tighten the screws “C”.
Notes: • Do not move the Front Belt Plate.
• When tightening the screws “C”, pay special attention so as not to turn the
Ribbon Tension Spring.
• Be sure that the Ribbon Tension Spring is fully contact with the Front Belt Plate.
Ribbon Tension Spring
C
Apply ThreeBond 1401B.
Plate, Front Belt
(Ribbon Tension Spring Block)
450g
Plate, Front Belt
Ribbon-tension spring
adjust ribbon (φ80mm)