Citizen CL-S700 Label Maker User Manual


 
Chapter 2 Operating Principles
2-3. Operation Panel
CL-S700/CL-S703/CL-S700R 2-40
2-3-4. Factory/Service mode
Factory mode and Service mode are available for maintenance work,
Factory mode:
You can change the factory-set items such as logical shift of the sensor or head.
Service mode:
You can perform checks such as head check and service counter value that shows the media
length printed.
In this section, the followings are explained.
How to enter Factory/Service Mode
How to print the Factory Mode Settings menus
How to change the settings in Factory mode
How to operate service menu in Service mode
(1) How to enter Factory/Service Mode
To enter Factory/Service mode, perform the following operation.
While pressing and holding the [MENU], [FEED] and [STOP] keys, turn on the printer.
Then, the following is displayed on the LCD.
Key function in Factory/Service mode:
[FEED] (S) Returns to previous item, or the value is incremented/changed.
[MENU] (T) Goes to the next item, or the value is decremented/changed.
[PAUSE] (W) Resets the printer, or exits from the current menu.
[STOP] (X) Acts as the Enter key.
W
X
Main Menu
Factory Setup
Exit
Enter
S
T