Compaq 1000 Personal Computer User Manual


 
4-4 Removal and Replacement Preliminaries
4.1.6 Recommended Materials and Equipment
Other materials and equipment that are recommended for use in preventing static electricity
include:

Antistatic tape

Antistatic smocks, aprons, or sleeve protectors

Conductive bins and other assembly or soldering aids

Conductive foam

Conductive tabletop workstations with ground cord of one-megohm resistance

Static-dissipative table or floor mats with hard tie to ground

Field service kits

Static awareness labels

Wrist straps and footwear straps providing one-megohm +/- 10% resistance

Material handling packages

Conductive plastic bags

Conductive plastic tubes

Conductive tote boxes

Opaque shielding bags

Transparent metallized shielding bags

Transparent shielding tubes
4.2 Service Considerations
Listed below are some of the considerations that you should keep in mind during the disassembly
and assembly of the computer.
4.2.1 Tools and Software Requirements
To service the computer, you need the following:

Phillips-head screwdrivers for use with #0 and #1 screws

Flat-bladed screwdriver

Diagnostics software
Diagnostics software is not included with this computer. Compaq diagnostics
software, Version PC 10.25A, is available from the Compaq world-wide web site
at www.compaq.com. Third-party diagnostics software is also available.