Filter
Top Products
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer
NOTE: The Y and Z Cresnet data lines from the network are connected to the NET
connector, which is internally wired to the 4-position mini-terminal block connector
at each QM connector.
The MD5x1 can transmit balanced or unbalanced audio signals. Refer to the
following diagrams when connecting balanced and unbalanced signals to the
MD5x1.
Wiring for Unbalanced Signals (left) and Balanced Signals (right)
+G-
Signal Ground
Jumper
+G-
Signal + Ground
Signal -
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post your own question or view questions you
have submitted to Crestron’s True Blue Support, log in at
http://support.crestron.com
. First-time users will need to establish a user account.
Setup is easy thanks to Crestron’s Windows
-based programming software.
Crestron’s SystemBuilder software creates a complete project, with no special
programming required. SystemBuilder completes all necessary programming for a
base system including all touchpanel screens and the control system program. The
program output of SystemBuilder is a SIMPL Windows program with much of the
functionality encapsulated in macros and templates. Once SystemBuilder creates the
project, the system interfaces and program logic can be customized in SystemBuilder
or can be easily modified with Crestron development tools (i.e., SIMPL Windows
and Crestron VisionTools
®
Pro-e (VT Pro-e) software packages).
SystemBuilder comes with templates for all supported interfaces. If a user wishes to
create a touchpanel project using templates with a different look-and-feel, this can be
accomplished by making a custom template. This custom template can then be used
by SystemBuilder to create the final project files to be loaded into the panels.
Alternatively, VT Pro-e can be used to tweak projects created with the
SystemBuilder or develop original touchpanel screen designs.
Once the program created by SystemBuilder is loaded into the control system,
Digital Media Tools (DMT) Software can be used to tune the system for optimal
performance. DMT software can be used to test the quality of audio and video
signals as well as fine-tune audio and video settings.
Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 23