Filter
Top Products
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1
QM-MD5x1, Slot 3 Analog Output Signal Descriptions (continued)
OUTPUT DESCRIPTION
RightToAudioOutSp_F Indicates the current mixing level being applied
to the Right program channel of the selected
audio source (on the SP channel of AUDIO
OUT).
MicMixToAudioOutL_F Indicates the current mixing level being applied
to “Mic Mix” (on the PRG L channel of AUDIO
OUT).
LeftToAudioOutL_F Indicates the current mixing level being applied
to the Left program channel of the selected audio
source (on the PRG L channel of AUDIO OUT).
RightToAudioOutL_F Indicates the current mixing level being applied
to the Right program channel of the selected
audio source (on the PRG L channel of AUDIO
OUT).
MicMixToAudioOutR_F Indicates the current mixing level being applied
to “Mic Mix” (on the PRG R channel of AUDIO
OUT).
LeftToAudioOutR_F Indicates the current mixing level being applied
to the Left program channel of the selected audio
source (on the PRG R channel of AUDIO OUT).
RightToAudioOutR_F Indicates the current mixing level being applied
to the Right program channel of the selected
audio source (on the PRG R channel of AUDIO
OUT).
Slot 4: Graphic EQ
The MD5x1 provides a line-level audio output labeled AUDIO OUT. The output has
three channels labeled PRG L, PRG R and SP.
The MD5x1 provides graphic and parametric EQ for each of the three AUDIO OUT
channels. The graphic EQ portion can be programmed using either SIMPL Windows
or Crestron Digital Media Tools (DMT) software. The parametric equalizer and
fixed frequencies of the graphic equalizer can only be programmed using DMT
Software.
The MD5x1 provides 12 filters for each output channel, with a maximum of 10
filters available for graphic EQ. The unit supports five modes of audio equalization
(settable using DMT Software):
• 10 bands graphic EQ + 2 band parametric EQ. In this mode, the first 10
filters of the three channels are used to set up the fixed frequencies for
graphic equalization, leaving filters #11 and #12 available for parametric
EQ.
• 3 bands graphic + 9 bands parametric. In this mode, the first three filters of
the three channels are used to set up the fixed frequencies for graphic
equalization, leaving filters 4 through 12 available for parametric EQ.
• 5 bands graphic + 7 bands parametric. In this mode, the first five filters of
the three channels are used to set up the fixed frequencies for graphic
equalization, leaving filters 6 through 12 available for parametric EQ.
• 5 bands graphic + 7 bands parametric, with speech optimization. In this
mode, the first five filters of the three channels are used to set up the
graphic equalizer within the frequency ranges of the human voice, leaving
filters 6 through 12 available for parametric EQ.
44 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300