Filter
Top Products
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1
NOTE: The first MD5x1 in a system is preset with a Net ID of 1D when its symbol
is dragged into the upper pane of System Views. Additional units are assigned
different Net ID numbers as they are added.
C2Net Device, Slot 5
Setting the Net ID in Device Settings
Double-click the QM-MD5x1 icon in the upper pane to open the “Device Settings”
window. This window displays the device information for the MD5x1. The Net ID
can be changed in this window using the Net ID tab, as shown in the following
figure.
“QM-MD5x1 Device Settings” Window
NOTE: This procedure sets the Net ID for the MD5x1 in the program only. It does
not automatically set the Net ID for the MD5x1 itself. SIMPL Windows
automatically changes Net ID values of a device added to a program if a duplicate
device or a device with the same Net ID already exists in the program. Always
ensure that the hardware and software settings of the Net ID match. For Net ID
hardware setting details, refer to “Identity Code” on page 18.
QM-MD5x1 Symbols in Programming Manager
Programming Manager is where programmers “program” a Crestron control system
by assigning signals to symbols. The MD5x1 is broken down into five slots. Each
slot contains a programming symbol for specific functions of the MD5x1.
26 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300