Filter
Top Products
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1
QM-MD5x1, Slot 4 Digital Input Signal Descriptions
INPUT DESCRIPTION
SaveAudioOutTrimPreset Saves the 30 trim values to the trim preset given
by the analog signal AudioOutTrimPreset#
when the input is held high.
The trims are defined by the
AudioOut...TrimBand1 through
AudioOut...TrimBand10 analogs.
High/1 (level-sensitive) = Save trim preset;
Low/0 = No trim preset save
RecallAudioOutTrimPreset Recalls the trim preset given by the analog signal
AudioOutTrimPreset# when the input is held
high.
Recalling a preset adjusts 30 trims (10 trims each
for the PRG L, PRG R, and SP channels of
AUDIO OUT).
High/1 (level-sensitive) = Recall trim preset;
Low/0 = No trim preset recall
RecallAudioOutFilterPreset Recalls the filter preset given by the analog
signal AudioOutFilterPreset# when the input is
held high. The filters can only be adjusted with
DMT Software.
High/1 (level-sensitive) = Recall filter preset;
Low/0 = No filter preset recall
QM-MD5x1, Slot 4 Analog Input Signal Descriptions
INPUT DESCRIPTION
AudioOutTrimPreset# Sets the trim preset number that will be saved or
recalled.
Valid analog values range from 1d to 10d. Out-
of-range values are ignored.
AudioOutFilterPreset# Sets the filter preset number that will be recalled
when RecallAudioOutFilterPreset is held high.
Valid analog values range from 1d to 5d. Out-of
range values are ignored.
AudioOutLTrimBand1 through
AudioOutLTrimBand10
Sets the 10 trim values for the PRG L channel of
AUDIO OUT.
Valid analog values range from -100d (-10 dB) to
+100d (+10 dB), adjustable in increments of 0.1
dB. Changing the analog value by 1d signifies a
boost or attenuation of 0.1 decibels.
A trim of 0d (0 dB) means that the signal will
pass unaffected.
AudioOutRTrimBand1 through
AudioOutRTrimBand10
Sets the 10 trim values for the PRG R channel of
AUDIO OUT.
Valid analog values range from -100d (-10 dB) to
+100d (+10 dB), adjustable in increments of 0.1
dB. Changing the analog value by 1d signifies a
boost or attenuation of 0.1 decibels.
A trim of 0d (0 dB) means that the signal will
pass unaffected.
(continued on next page)
46 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300