Filter
Top Products
46
Dane-Elec. All rights reserved 2010
my-Ditto User Manual
Time Server Address
You can manually assign the time server address if the default time
server does not work.
Daylight Savings
my-Ditto can also take Daylight savings into account. If you wish to
use this function, you must check/click the enable box to set up
your daylight saving configuration (below).
Times From
Select the date in which you wish to start using daylight saving.
Times to
Select the date in which you wish to stop using daylight saving.
Set System Date and
Time
If the time server does not work, you can manually set your
system’s current date and time here. In order to apply these
changes you should type 0.0.0.0 in the Time Server Address field.
Click <Apply> to save your changes.
5.13.3 Advanced Settings – Network
Set the IP address of my-Ditto manually.
Parameters
Description
Obtain an IP address
The DHCP server is used to manage the IP address of a network. If
you have a live DHCP server in your network and want my-Ditto to