Filter
Top Products
82
Dane-Elec. All rights reserved 2010
my-Ditto User Manual
10 Managing External USB Storage Devices
10.1 Overview
The simplest way to add more hard disk space is to connect an external USB Storage Device.
For more information to “Connect External Hard Drive,” please see Section 10.3, on page 81.
If you add an external USB Storage Device, it can function as any other disk. The only
difference is that it will not contain private and shared folders.
10.2 Single-touch Copy
The single-touch copy feature provides instant data backup from an external USB storage
device to my-Ditto, using the single press of a button.
In order to copy the content from any USB storage device, perform the following steps:
1. Plug the external USB storage device into my-Ditto’s USB2 port located on the rear
panel.
2. Wait until the USB2 LED is illuminated.
3. Press the COPY button located on the front panel for 5 seconds, until a beep is heard.
4. The USB2 LED will begin flashing slowly, indicating that the files are being
transferred.